Singelloop Breda 2022 28 Septiembre 2022
Skalar doet mee aan de Singelloop in Breda.
Zondag 2 oktober 2022
Skalar doet mee aan de Singelloop in Breda.
Zondag 2 oktober 2022
In collaboration with the RBINS in Belgium, we have automated and optimized the analysis of acidification parameters for a fast and accurate measurement on a SAN++ analyzer
Tips and tricks in analytical chemistry by Rob van Turnhout, sales manager at Skalar Analytical
Skalar wishes you a Happy Easter!
New application for weighing of crucibles implemented on our SP2000 platform.
Another example of our flexible SP2000 robotic platform. This time the SP2000 has been configured with an automatic application for the pulp and paper industry.
The advantages of automating your nutrient analysis in agricultural samples with our San series.
With the introduction of this automatic weighing application on the SP2000 robotic analyzer platform we complement the possibilities on our current range of waster & wastewater analyzers.
New SP2000 configuration for Total Suspended Solid (TSS) analysis.
Wet chemistry analyzer including in-line automatic sample pre-treatment.
This new mechanism makes it possible to pipette from large to small containers with multiple needles simultaneously.
This year has been a very special and challenging one but also successful for Skalar, and we could not have done it without you
Are you a water laboratory using manual test kits for your analysis and do you want to take it a step further? Then please take the time to read our newsflash on how our test kit robot can benefit your lab!
The robot takes over tedious and frequently repetitive, time-critical, manual handling steps such as sample pipetting, dilution, mixing at varying speeds, (de)-capping of sample bottles, addition of hazardous reagents such as acids and, last but not least, dispensing of the diluted samples at a precise rate of 3 ml/min on to dedicated cartridges as part of the extraction procedure for further AOX analysis.
Fertilizer analysis with the San ++ continuous flow analyzer
SP2000 sample preparation of soil samples in VOC vials for subsequent GC analysis
Did you know Skalar has various techniques available for capping / de-capping vials, tubes, bottles etc?
An agricultural laboratory in the Netherlands analyses total phosphate, total nitrogen and potassium in animal manure and fertilizer samples according to NEN 7433 for the pre-treatment and in accordance with NEN 7434, 7435 and 7436 for the measurements.
Skalar will participate in the virtual event of ChemBio Finland on Wednesday 28th April, 2021. The subscription for this event is free of charge, so don't miss it!
Fertilab is an independent, agricultural laboratory specialized in soil, plant, fertilizer and water analysis located in Dronten, The Netherlands
Set up of two double electric vehicle charging stations in Skalar's parking area.
Skalar organizes various webinars this year. For more information check our contact page.
Visit us at hall #15 and learn all about the Skalar products and applications.
Spot the Skalar San++ nutrient analyzer on board of the Indian research vessel: Sagar Anveshika
Including easy to use laboratory specific analysis methods, intelligent functionalities such as Smart NPOC, Smart Sparging, Smart dilutions and all the excellent features of the earlier software versions like multi point regression, automatic exclusion of results, recalculation, statistics, excellent quality control tools, automatic start-up & shut down and user defined result export & print features.
Why our discrete analyzer is perfect for sub ppb ammonia analysis?
The SP2000 robot platform offers fully automatic analysis of pH, conductivity (EC), turbidity and acid capacity in drinking and swimming pool water and additionally the measurement of the Spectral Absorption Coefficient (SAC) 254, 436 and 410 nm.
Automated analysis for carbonate/bicarbonate, conductivity, oxygen, pH and turbidity in surface water, ground water, drinking water, waste water and swimming pool water.
Automating your tedious sample preparation with a SP2000 robotic platform
Did you know Skalar has a wide range of of sophisticated analyzers for the automation of a wide variety of soil, plant and fertilizer analysis?
Isopharm is a UKAS accredited water testing laboratory which offer an extensive range of chemical and microbiological testing services, application support,
consultation and training to a wide range of clients across many industries.
We would like to invite you to the "Launch Days" of myBeviale.com from 11-12 November 2020. This event replaces the BrauBeviale 2020 exhibition.
Automated beta-glucan analysis including degassing of the samples, (de)-capping the sample tube, sample dilution, addition of reagents, mixing and measurement of the absorbance
Analyse your most challenging food and feed samples quick and easy with our PrimacsSN100 analyzer, especially designed for the determination of nitrogen/protein.
We would like to take the opportunity to thank everyone for taking the time to join the Skalar webinars and for visiting our digital booth at Virtual Analytica!
Skalar invites you to join the Virtual trade show of Analytica. Skalar analyzer range will be on display in the digital booth. Skalar Sales manager are available for a chat in case you would like to receive more information. This virtual event is free of charge.
Skalar launches a NEW corporate movie.
With the introduction of the San compact wet chemistry analyzer, Skalar extends its continuous flow analyzer series with a compact and flexible automation solution for accurate and fully-automated colorimetric analysis.
Renovation and modernization accelerate innovation - Skalar Analytical houses production and lab under one roof.
We are excited to announce that the renovation and expansion of Skalar's headquarters in Breda is now finished.
Skalar has several fully automated solutions for the brewing industry. The Brauerei C. & A. VELTINS laboratory in Meschede, Germany, uses the SP2000 robot for the automation of their spectrophotometric analysis in the various types of beer and wort samples.
For Eurofins in Amsterdam, Skalar has automated the LUTUM analysis according to OVAM (Public Flemish Waste Agency) and SIKB-AP04 (Infrastructure Quality Assurance Soil Management) guidelines of pre-treated soil samples.
New feature for the 1050 autosampler series: automatic dilutions with multiple dilutors
Many people are concerned about the rapid spread of the coronavirus (COVID-19). We would like to inform you about how we at Skalar Analytical deal with this situation.
Dedicated automation solution for handling tobacco samples before analysis
We warmly welcome you to visit the Skalar booth 2315 during Pittcon 2020!
Expansion and renovation of Skalar's headquarters in Breda!
We are very proud to announce that we have just opened a new Skalar office in Lisbon, Portugal.
Skalar has automated the sample filtration of water samples, followed by the measurement of conductivity (EC) / pH and the sample distribution to several destination racks for further analysis on other analyzers.
Our latest development for a water laboratory in the Netherlands automates the sample preparation and then measures oxygen, pH, alkalinity, color (UV/VIS), EC, turbidity in drinking water, surface water and wastewater.
The PrimacsSNC-100 offers a temperature ramping program allowing the analysis of Carbon according to DIN 19539 method A. In addition, it is now possible to determine TOC400, ROC and TIC900 according to DIN 19539 method B.
The analysis of Total Organic Carbon (TOC) in seawater can create many challenges for laboratories, not only because of the low TOC concentration, but also the salty sample matrix might be problematic for TOC analyzers.
En el manejo de residuos es necesario diferenciar entre las diferentes especies de Carbono en matrices de suelos o similares. Altos niveles de Carbono Orgánico (COT) en suelos pueden afectar a los procesos de digestión anaeróbica y limitar el enrequecimiento en Nitrógeno del subsuelo.
Successful installation story about nutrient analysis with the San++ Continuous flow analyzer aboard a ship.
The PrimacsSNC-100 not only offers classical TOC/TN analysis, but it allows for seperate TOC, TEC and TIC measurement according to DIN 19539 as well.
Thank you for visiting the Skalar booth during BCEIA 2017.
Skalar participated in Jasis 2017 in Japan.
Skalar has developed a new automated method on the San++ Continuous flow analyzer for the determination of Total Alkaloids as Nicotine using KSCN/DCIC
Skalar developed a new automated method for determination of Sulfur Dioxide in Beer on our San++.
Sub ppb detection levels for Free Cyanide analysis on the San++ Continuous Flow Analyzer
Skalar presented their complete product range for the Brewing Industry during the European Brewery Convention.
The item about Skalar in a program called "Doe Maar Duurzaam" is now available with English subtitles.
Thank you for visiting the Skalar booths at the BrauBeviale and WWEM.
Mocht u het item over Skalar in het programma "Doe maar Duurzaam"gemist hebben dan kunt u het fragment bekijken in dit nieuwsbericht.
Another smart automation example is the SP2000 BOD analyzer including sample pipetting, pH setting- and aeration of the sample
Skalar ha desarrollado el analizador robótico SP2000 totalmente automatizado para el análisis de pH, CE, turbidez y color para un prominente laboratorio de agua de Reino Unido, procesa aproximadamente 500 muestras de agua cada día
The making-of...
Skalar in the RTL7 program "Doe maar duurzaam"
Skalar has developed the SP2000 fully automated robotic analyzer for the analysis of pH, EC, Turbidity and Color for a prominent UK water laboratory, which processes approximately 500 water samples each day.
We are pleased to announce Skalar UK Ltd, with immediate effect, has relocated to a new office in Milton Keynes, Buckinghamshire.
The movie of our Primacs SNC-100 solid TOC/TN analyzer is now available in the video gallery of the website
‘Custom automation is our strength’ What began as a Delft University of Technology spinoff has blossomed into an international supplier of continuous flow analyzers, robot platforms and TOC/TN analyzers. Skalar’s equipment for (wet) chemical analyses has found its way across the globe and is praised for its high degree of automation.
By Vincent Hentzepeter | Translation: Word’s Worth | Photography: Foodnote
Sub ppb detection levels for routine Chromium-6+ analysis on the San++ analyzer
Skalar introduces the SP2000 for water laboratories using automated test kit applications such as the small scale sealed tube COD (ST-COD) test according to ISO 15705 or Total Phosphate, Total Nitrogen Ammonium, Nitrite test kits and others.
Skalar San++ continous flow analyzer in operation
Skalar launches the most flexible Biochemical Oxygen Demand (BOD) analyzer available today.
With this new BOD analyzer, we offer a modular and advanced sample handling system providing you with the tools you need to automate the BOD analysis in your environmental laboratory.
The implementation of a new type of flow cell in the San++ has already been used to increase the sensitivity for the automated procedure of Total Phosphate and Total Phenol considerably, but is now also available for the analysis of Total Cyanide.
Skalar's latest development is the SP50 robotic analyzer, configured for combined analysis of the small scale sealed-tube COD (ST-COD) and Total Phosphate (TP).
Automatic pre- and post sample dilution and preparation of working standards with the HTAccess V3 TOC/TN analyzer software.
Skalar offers with the SP1000 BOD analyzer including sample pipetting a fully automated “walk away” solution for the commonly used and labor-intensive BOD application.
Skalar has a wide range of solutions for automatic cyanide analysis currently available.
The Biochemical Oxygen Demand (BOD) analysis is one of the most common applications for water laboratories. All Skalar Robotic analyzers can provide the automation for BOD according to EPA 405.1/ISO 5815-1.
Skalar is pleased to present the next step in automation for the small scale sealed-tube COD analysis including automatic sample pipetting. This new feature completes the automation of st-COD procedure.
Skalar launches its latest Robotics software package for controlling the range of Robotic analyzers.
Increased sensitivity can be achieved for the automated Phosphate method by implementation of a special flow cell in the San++. This long pathlength flow cell combines an increased optical pathlength of 500 mm with a small sample volume (125 µl).
Skalar's most recent development is the implementation of a new type of flow cell in the San++ which increases the sensitivity for the automated procedure of Phenol analysis considerably.
Skalar is pleased to introduce its next generation of the HTAccess™ software package, used by the TOC/TN analyzer range.
Skalar was present during the International Conference on Flow Analysis in Krakow, Poland.
Skalar India has been moved to a new office in Chennai.
Skalar Belgium is moving to a new office.
Skalar has developed a highly accurate and reliable application for detecting low levels of anionic surfactants in all kind of water samples for the San++ continuous flow analyzer.
To enable quick, easy and save transport between one location to another, Skalar has now special transport cases available for the San++ seawater analyzer.
Automation of sample preparation steps and the subsequent analysis not only speeds up these procedures but also saves valuable operation time and generally increases accuracy, reproducibility and productivity. With Skalar's Robotic Analyzer series, it is possible to prepare and analyze your samples fully automatically.
Skalar is present at the following exhibitions, Eurolab, Pittcon, ChemBio and Laborama.
Seawater analysis is an essential part of environmental monitoring. High quality nutrient data retrieved over time periods can give us valuable information regarding our ecosystem. The San++ is ideal for the analysis of extremely low nutrient concentrations in seawater and provides high quality, accurate and highly reproducible results.
Skalar is proud to launch the next generation of the FlowAccess™ software package for the SAN++ continous flow analyzer: FlowAccess™ V3.
Skalar has automated the detection of trace concentrations of formaldehyde in water and the total concentration of formaldehyde in adhesives on the San++ in cooperation with Dynea. Automating these analytical procedures with the San++ provides Dynea excellent, reliable and reproducible results and saves on costs and labor time.
From March 23rd-26th Skalar will attend Analytica 2010 in München, Germany. Analytica is the international Fair for Instrumental Analysis, Laboratory Technology and Biotechnology with analytica Conference. More information http://www.analytica.de
Many laboratories on a daily basis analyze many samples for the presence of various forms of cyanide. Most of these samples do require manual distillation and/or digestion of the sample prior to a standard colorimetric detection in order to remove the presence of known interferences.
The International Trade Fair of Analytical, Measurement and Control Technology EuroLab will be held for the 12th time in the Trade Fair and Congress Centre MT Polska in Warschau, Poland.
Pittcon is the world's annual premier Conference and Exposition on laboratory science. It is organized by The Pittsburgh Conference on Analytical Chemistry and Applied Spectroscopy.